EMI / RFI / EMC Power and Signal line filters

Ultra high performance power line filters (UHP series)

The Ultra high performance power line filter serie is the best available power line filter serie worldwide. These filters are designed for high performance shielded cabinets, shielded rooms and anechoic chambers, insertion loss of 100dB and more from 14 KHz to 40 GHz.

Ultra high performance power line filter serie type 2
- Insertion loss of 100dB
- Frequency range 100 KHz till 40 Ghz
- 16 till 300 amps available
- Low leakage
- Voltage drop is less than 1V

Download datasheets

Ultra high performance power line filter serie type 3
- Insertion loss till 100dB
- Frequency range from 14 Khz
- 6 till 200 amps available

Ultra high performance power line filter serie type 1
- Insertion loss of 100dB
- Frequency range 14 KHz till 40 Ghz
- 3 till 400 amps available
- Low leakage
- Voltage drop is less than 1V
- Can be delivered EMP proof

Download datasheets

Ultra high performance power line filter serie type 4 (For ground wire)
- Insertion loss of 100 dB
- Frequency range 14 KHz till 40 Ghz
- 16 till 100 amps available

Download datasheets

Ultra high performance power line filter serie type 5
- Insertion loss of 100dB
- Frequency range 14 KHz till 40 Ghz
- 6 till 32 amps available

Download datasheets

High performance power line filters (HP series)

High performance power line filter serie is designed to meet highest filter attenuation requirements over a wide range starting from a few kilohertz up to 5GHz required for TEMPEST/NEMP protection. Insertion loss of 60 to 80 dB in a wide frequency range.

High performance power line filter
- Rated currents from 6 to 20A
- IEC inlet for 6 and 10A versions
- TEMPEST/NEMP
- Up to 3GHz attenuation
- High surge voltage protection

Medium performance power line filters (MP series)

The Medium performance power line filter serie is designed for general purpose wire filtering. Attenuation over a range starting from 100 KHz to approximately 1GHz. Insertion loss of 50 to 60 dB.

Medium performance power line filters
- Rated currents from 50 to 300A
- Designed to be mounted directly on the entry panel
- TEMPEST/NEMP
- Up to 1GHz attenuation
- Insertion loss up to 50 dB

Download datasheets

Medium performance power line filters type 2
- Insertion loss approximately 60 dB
- Frequency range of 100 KHz to 1 Ghz
- 8 to 160 amps available

Standard performance power line filters (SP series)

The Standard performance power line filter serie is designed for frequency inverters and variable speed motor drives. Attenuation over a range starting from 100 KHz to 30MHz. Insertion loss of approximately 50 dB.

Standard performance power line filters
- 6 to 50 A current ratings
- Designed for easy-mounting
- Ideal for EMC-trouble shooting and EMC-refurbishing in the field

Download datasheets

Standard performance power line filters type 2
- 6 to 50 A current ratings
- Designed for easy-mounting
- Ideal for EMC-trouble shooting and EMC-refurbishing in the field

Standard performance power line filters type 3
- 1 to 30 A current ratings
- General-purpose filtering performance
- Ideal for EMC troubleshooting and field refurbishing

Standard performance power line filters type 4
- 0.6 to 6.5 A current ratings
- Low profile case
- Designed for easy-mounting

Signal line filters (SLF series)

This series of signal filters is specially designed to use for telephone, data communication, control and fire alarm. All filters are in compliance with standards specified by national Military Class C and D shielded room and anechoic chamber.

Data line filter
Shielded room feedthrough for high speed Ethernet/UTP communication links

Telephone, fax and AC/DC swtich signal line filter
Bandpass: 20 KHz
Lines: 2
Rated current: 0.3A

for Telephone, fax and AC/DC switch signal

Download datasheets

Waveguide Feed-Thru
Waveguide feed-throughs are available in most sizes for water, gas, optical data cables or air

AC DC switch signal, air-con, broadcasting and door accessing control
Bandpass: 100 KHz
Lines: 2
Rated current: 10A

for AC/DC switch signal, air-con, broadcasting and door acessing control

Filter for visual system
Bandpass: 6 MHz
Lines: 1
Rated current: 1A

For visual system

Filter for Special telefpone, fire alarm, monitor and door accessing control
Bandpass: 6 MHz
Lines: 2
Rated current: 1A

For Special telephone, fire alarm, monitoring and door accessing control

DVI USB 2.0 Data line filter
Shielded room feedthrough for USB 2.0 and DVI communication links


Sign up for the newsletter:
Name:
E-mail:
subscribe	unsubscribe

Sign up for the newsletter:

Navigate